Bosch B9512G - Area Options Menu Parameters

136 en | Keypad Installer menu Control Panels
2016.06 | 08 | F.01U.303.996 Installation and System Reference Guide Bosch Security Systems, Inc.
6. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads configuration of RPS Port Number
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [1] Program > [3] RPS > [3] RPS Port Number.
3. Press [Edit] to change the port number.
4. Delete the existing number, if necessary, and then enter the new number.
5. Press [Save] to save the programming.
6. When the keypad shows Parameter Saved, escape from the menu.
20.1.13 [4] Area Options menu parameters
This parameter enables or disables specified areas. Enabled areas must have assigned account
numbers. In this menu, you can turn on or off areas and assign area account numbers.
Notice!
Account numbers can contain characters 0 through 9, and B through F.
Area 1 Area 2 Area 3 Area 4
Area On Yes/No Yes/No Yes/No Yes/No
Account Number ______________ ______________ ______________ ______________
Area 5 Area 6 Area 7 Area 8
Area On Yes/No Yes/No Yes/No Yes/No
Account Number ______________ ______________ ______________ ______________
Area 9* Area 10* Area 11* Area 12*
Area On Yes/No Yes/No Yes/No Yes/No
Account Number ______________ ______________ ______________ ______________
Area 13* Area 14* Area 15* Area 16*
Area On Yes/No Yes/No Yes/No Yes/No
Account Number ______________ ______________ ______________ ______________
Area 17* Area 18* Area 19* Area 20*
Area On Yes/No Yes/No Yes/No Yes/No
Account Number ______________ ______________ ______________ ______________
Area 21* Area 22* Area 23* Area 24*
Area On Yes/No Yes/No Yes/No Yes/No
Account Number ______________ ______________ ______________ ______________
Area 25* Area 26* Area 27* Area 28*