Control Panels Keypad Installer menu | en 163
Bosch Security Systems, Inc. Installation and System Reference Guide 2016.06 | 08 | F.01U.303.996
20.6 [6] Cloud menu
Use the Cloud menu to enable or disable the Cloud capability in the control panel.
Cloud (In the Installer menu)
B91x/B92x keypads configuration of Cloud
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [6] Cloud. The keypad shows the current status; disabled, enabled on Ethernet,
enabled on cellular, or enabled on both Ethernet and cellular.
3. Press [ENTER] to change the status, or press [ESC] without making a change. Use [NEXT]
to scroll through the list of available options and press [ENTER] to accept the choice on
the display. To use the Cloud, enable it on Ethernet or Cellular or both.
4. Upon changing the setting, the keypad shows Parameter Saved, and then closes the menu.
B93x/B94x keypads use of Enable Status
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [6] Cloud. The keypad shows the current status; disabled, enabled on Ethernet,
enabled on cellular, or enabled on both Ethernet and cellular.
3. Press [Edit] to change the status, or press [ESC] without making a change. Use /
[NEXT] to scroll through the list of available options and press Save to accept the choice
on the display To use the Cloud, enable it on either Ethernet or Cellular or both.
4. Upon changing the setting, the keypad shows Parameter Saved, and then closes the menu.
20.7 [7] USB Power
Use the USB Power menu to enable or disable the power to the USB port. For more
information, refer to USB power, page 68.
USB Power
B91x/B92x keypads use of USB power
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [7] USB Power. The keypad shows the current status, On or Off.
3. Press [ENTER] to change the status.
4. Escape from the menu.
B93x/B94x keypads use of USB power
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [7] USB Power. The keypad shows the current status, On or Off.
3. Press Turn On or Turn Off, as desired.
4. Escape from the menu.
To Next Page
Loading...
