Bosch B9512G - Compatible UL Listed Synchronization (Sync) Modules and Strobes

22 en | System overview Control Panels
2016.06 | 08 | F.01U.303.996 Installation and System Reference Guide Bosch Security Systems, Inc.
Model Name
EN1235S Beltclip Pendant Transmitter (Single-button)
EN1235SF Fixed-location Transmitter (Single-button)
EN1242 Smoke Detector Transmitter
EN1247 Glass-break Detector Transmitter
EN1249 Bill Trap Transmitter
EN1260 Wall Mount Motion Detector
EN1261HT High Traffic Motion Detector
EN1262 Motion Detector With Pet Immunity
EN1265 360° Ceiling Mount Motion Detector
EN4200 Serial Receiver
EN4204R Four Zone Add-on Receiver With Relay Outputs
EN5040-T High Power Repeater With Transformer
EN7016* Wireless Survey Kit
ENKIT-SDI2 B820 and EN4200 Kit
*Not investigated by UL.
Notice!
No wireless detectors have been approved for use with alarm verification points.
For specific installation and operation instructions, please refer to manufacturers' manuals.
D125B 2-wire smoke compatibility table
Refer to the Dual Class B Initiating Module (D125B) Installation Instructions.
3.2.1 Compatible UL Listed Synchronization (Sync) modules and strobes
Notice!
For UL 864 compliance, use only these models of synchronization modules and strobes.
Synchronization modules and strobes capacity
Device Maximum number of devices
1
Wheelock control panel powered devices 4
Wheelock 12 VDC external powered devices 11
Wheelock 24 VDC external powered devices 33
System Sensor control panel powered devices 4
System Sensor 12 VDC external powered devices 11
System Sensor 24 VDC external powered devices 33
1
High current settings reduces the quantity.