Bosch B9512G - Page 137

Control Panels Keypad Installer menu | en 137
Bosch Security Systems, Inc. Installation and System Reference Guide 2016.06 | 08 | F.01U.303.996
Area On Yes/No Yes/No Yes/No Yes/No
Account Number ______________ ______________ ______________ ______________
Area 29* Area 30* Area 31* Area 32*
Area On Yes/No Yes/No Yes/No Yes/No
Account Number ______________ ______________ ______________ ______________
*Supported by the B9512G only.
Area On
B91x/B92x keypads configuration of Area On
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [1] Program > [4] Area Options. The keypad toggles between showing the Area On
state and the account number for the selected areas.
3. Use [PREV] or [NEXT] to go to the desired area.
4. Press [ENTER] to edit the area and then [ENTER] to edit the Area On state for the
selected area.
5. Use [PREV] or [NEXT] to toggle between Yes and No.
6. Press [ENTER] while viewing the desired option to save the programming.
7. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads configuration of Area On
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [1] Program > [4] Area Options menu. The keypad shows the Area On state for the
selected area.
3. Use /[PREV] or /[NEXT] to go to the desired area.
4. Press [Edit] to edit the Area On state for the selected area.
5. Press [Yes] or [No].
6. Press [Save] to save the programming.
7. When the keypad shows Parameter Saved, escape from the menu.
Account Number
B91x/B92x keypads configuration of Account Number
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [1] Program > [4] Area Options. The keypad toggles between showing the Area On
state and the account number for the selected areas.
3. Use [PREV] or [NEXT] to go to the desired area.
4. Press [ENTER] to edit the area, and then press [NEXT] to go to the account number
option.
5. Press [ENTER] to edit the account number for the selected area.
6. Delete existing characters, if necessary, and then enter the new characters.
7. Press [ENTER] to save the programming.
8. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads configuration of Account Number
1. Enter the installer passcode, and then open the [1] Installer menu.