Bosch B9512G - Page 166

166 en | Specifications Control Panels
2016.06 | 08 | F.01U.303.996 Installation and System Reference Guide Bosch Security Systems, Inc.
4 BATTERY - Bosch supplied wire lead, included with control panel..
5 BATTERY +
6 Output A (1) Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on current
7 Output B (2)
8 Output C (3)
9 COMMON
10 EARTH GROUND 14 to 16 AWG
11 POINT 1 Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on loop resistance less than 100 Ω
12 POINT 1/2 COMMON Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on loop resistance less than 100 Ω
13 POINT 2 Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on loop resistance less than 100 Ω
14 POINT 3 Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on loop resistance less than 100 Ω
15 POINT 3/4 COMMON Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on loop resistance less than 100 Ω
16 POINT 4 Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on loop resistance less than 100 Ω
17 POINT 5 Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on loop resistance less than 100 Ω
18 POINT 5/6 COMMON Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on loop resistance less than 100 Ω
19 POINT 6 Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on loop resistance less than 100 Ω
20 POINT 7 Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on loop resistance less than 100 Ω
21 POINT 7/8 COMMON Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on loop resistance less than 100 Ω
22 POINT 8 Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on loop resistance less than 100 Ω
ZONEX ZONEX Bosch supplied wire, included with the optional B600
23 SDIx COMMON Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on peripheral device current
24 SDIx DATA BUS B 22 AWG min (up to 14 AWG max)
25 SDIx DATA BUS A
26 SDIx POWER Terminal accommodates 14 to 22 AWG, use appropriate
wire size based on peripheral device current