DP-EA4 Peripheral Bus Station Module
9–2
1070 072 145-102 (01.07) GB
The DP-EA4 peripheral bus station module provides 4 bytes for inputs (from
the vantage point of the PROFIBUS-DP Master, these are the outputs of the
slave), and 4 bytes for inputs (from the vantage point of the PROFIBUS-DP
Master, these are the inputs of the slave).
. The assignment within the bus master system is accomplished by ap-
propriately configuring the bus master file.
Module slots
CAUTION
Only vertical installation is permitted.
1234567
Basic unit
GG3
1234567
Expansion unit
GG3
GG3-K
GG3-K
CAUTION
Risk of module damage!
Do not insert or remove the module while the controller is switched
ON! This may destroy the module. Prior to inserting or removing the
module, ensure that module is not energized!
CAUTION
Risk of module damage!
Observe all ESD protection measures when handling the module!
Prevent electrostatic discharges!
To Next Page
Loading...
