NT200 Power Supply Module
4–4
1070 072 145-102 (01.07) GB
PG Mode LED
. Refer to Chapter 5, Central Processing Unit, section 5.2, Display and
Control Elements
Copy / Stop / Run switch/button
. Refer to Chapter 5, Central Processing Unit, section 5.2, Display and
Control Elements
Stop LED
. Refer to Chapter 5,Central Processing Unit, section 5.2, Display and
Control Elements
5V / 7.5V LED
When this LED illuminates, the 5 V and /.5 V supply voltages for central pro-
cessing unit and periphery modules are present.
X10 connector
The X10 connector comprises the terminal for the 24 V power (form factor
5.08).
To Next Page
Loading...
