Panel Controller For your safety | en 11
Bosch Sicherheitssysteme GmbH User Guide 2017.09 | 7.0 | F.01U.258.929
2.4 Usage in accordance with regulations
The panel controller is designed for operating the FPA-5000/FPA-1200 fire panel. It can
perform the following tasks:
– Displaying and processing various message types such as alarm and trouble messages
– Bypassing, isolating and resetting elements
– Performing a walktest
– Display diagnostic information about every LSN element
– Configuration of detectors (short texts and detector sensitivity)
– Performing a drill
– Saving, displaying and printing out events
– Switching the system to day or night mode.
2.5 Skills required by personnel
Display of event messages on the panel controller must only be processed by trained
personnel.
The system walk test and detector configuration must only be performed by trained,
authorized personnel.
To Next Page
Loading...
Need help?
General
