60 en | Isolate Panel Controller
2017.09 | 7.0 | F.01U.258.929 User Guide Bosch Sicherheitssysteme GmbH
13.3.1 Using the menu
To display a list of all isolated elements, select the following in the start menu:
1. Bypass Block
2. Block
3. Show blocked devices
A list of various element categories is displayed. The listed figure indicates the number of
isolated elements or element groups in the relevant element category.
4. Select the element category you require, e.g. Detector .
A list of all isolated detectors is displayed.
To de-isolate isolated elements:
1. Select the element you require.
2. Select Un- block.
The element is de-isolated.
13.3.2 Via the status bar
To display a list of all isolated elements:
1. Select Bypass from the status bar.
A list of various states is displayed.
2. Select Blocked.
A list of various element categories is displayed. The listed figure indicates the number of
isolated elements or element groups in the relevant element category.
3. Select the list field you require, e.g. Detector .
A list of all isolated elements is displayed.
To de-isolate isolated elements:
1. Select the element you require.
2. Select Un- block.
The element is de-isolated.