Panel Controller Further functions | en 89
Bosch Sicherheitssysteme GmbH User Guide 2017.09 | 7.0 | F.01U.258.929
20 Further functions
This chapter contains information about the following points:
– Change Date / Time, page 89
– Master password, page 89
– Remote Services, page 90
– Change password, page 91
– Performing a fire drill, page 91
– Alarm Counters, page 92
20.1 Menu overview
Further functions -> Change date / time Master password
Remote access Change password
Drill Alarm counters
20.2 Change Date / Time
To change the date and time:
1. In the start menu, select Further functions
2. Change date / time
3. Touch the field you require and enter a new value.
Refer to Entering numbers and text, page 29 for information on how to enter figures or
text.
4. Select OK to confirm the entry or Cancel to cancel the operation.
The new values for date and time are accepted into the system.
20.3 Master password
Notice!
With the master password, all functions can be operated and passwords and names can be
changed.
One of the following two options is offered:
– Entering a master password that is valid indefinitely. This password cannot be changed
and is available from the relevant Bosch branch on request.
– Entering a master password that is valid for a specified period of time.
This password is only valid for 24 hours. The panel controller can issue a number on
request. This number must be forwarded to the Support department. The Support
department can then issue a 24-hour password; see Enter the 24-hour master password,
page 90.
Notice!
The Support department can be reached on the following number: +49 (0)89-62 90 18 88.
Business hours:
Monday to Thursday from 8 am to 5 pm
Friday from 8 am to 4 pm
After the password has been entered, various options are offered; see Operator, page 86.
20.3.1 Enter the master password that is valid indefinitely
1. In the start menu, select Further functions
To Next Page
Loading...
Need help?
General
