Bosch FPA-1200-MPC-C User Manual

Panel Controller Fault message | en 55
Bosch Sicherheitssysteme GmbH User Guide 2017.09 | 7.0 | F.01U.258.929
After the successful resetting of all elements, the standby display is displayed.
11.4 Isolating an element
In order to isolate an element that has caused a fault:
1. Select the fault message you require.
2. Select Block.
!
Caution!
The system does not transmit any information as to whether it was possible to isolate the
selected element. To monitor the operation, check the element.

Bosch FPA-1200-MPC-C Specifications

General

Brand	Bosch
Model	FPA-1200-MPC-C
Category	Control Panel
Language	English