24 en | Operating principle Panel Controller
2017.09 | 7.0 | F.01U.258.929 User Guide Bosch Sicherheitssysteme GmbH
5 Operating principle
In addition to a brief menu overview, this chapter contains information about the following
points:
– Logging on and off, page 24
– Access authorization, page 25
– Calling up the start menu, page 25
– Selecting the menu, page 26
– Returning to the previous selection, page 26
– Working with lists, page 26
– Search Function/Element, page 29
– Entering numbers and text, page 29
– Changing language display, page 31
– Switching between status bars, page 31
– Standby, page 31
– Logical and physical addressing, page 31
5.1 Logging on and off
To gain access to access levels 2 to 4, it is necessary to log in. The prerequisite is that you
have access authorization.
Notice!
To log in, you need a user ID and password. Depending on your access authorization, you can
use only particular functions.
In the following cases, you will be asked to enter a password:
You are not logged in and want to select a function for which a password is required.
You are already logged in but a higher access authorization is required for the function you
have selected.
5.1.1 Logging in
To log in to the panel controller:
1.
Press the "key" key.
The login window is displayed:
2. Enter your user ID in the first field.
Refer to Entering numbers and text, page 29 for information on how to enter numbers.
3. Enter your password in the second field.
On the display, each digit of the password is indicated with an asterisk so that nobody
else can see the password.
Notice!
If you do not have your own password, enter the following numbers: 000000.
4 Select OK to confirm the entries or Cancel to cancel the operation.
Refer to Change password, page 91 for information on how to set up your own password.
The standby display is shown.
As long as an operator is logged in, the key icon will be displayed on the info bar.
To Next Page
Loading...
Need help?
General
