4 en | Table of contents Panel Controller
2017.09 | 7.0 | F.01U.258.929 User Guide Bosch Sicherheitssysteme GmbH
5.7.2 Various states of list fields 27
5.7.3 Selecting element/function 28
5.7.4 Assigning mode 28
5.8 Search Function/Element 29
5.8.1 Search by name 29
5.8.2 Searching by number 29
5.9 Entering numbers and text 29
5.9.1 Changing an entry 31
5.9.2 Deleting all numbers 31
5.10 Changing language display 31
5.10.1 Entering key combination 31
5.11 Switching between status bars 31
5.12 Standby 31
5.13 Logical and physical addressing 31
6
Networked panels 33
6.1 Icons on the display 33
6.2 Network addressing 33
6.3 Establishing a remote connection with a networked panel 34
6.4 Terminating a remote connection with a networked panel 34
6.5 Isolating and restricted connection 34
7
Networking via Ethernet 36
7.1 IP settings 36
7.2 Ethernet redundancy 37
7.3 Diagnostics 38
8
Remote keypad 39
8.1 Operation and display 39
9
Alarm 40
9.1 Types of alarm 40
9.2 Entry delays 40
9.3 Day and night mode 41
9.4 Alarm message to the panel 42
9.4.1 Optical and acoustic signals 42
9.4.2 Displaying the detector zones in alarm state 42
9.4.3 Sequence of the alarm messages 43
9.4.4 Information about logical zones in the alarm state 43
9.4.5 The newest message 44
9.4.6 Displaying the individual detectors in a logical zone 44
9.4.7 Information about individual detectors 44
9.4.8 Displaying additional information 45
10
Fire alarm 46
10.1 Optical and acoustic signals 46
10.2 Acknowledging a message 46
10.3 Switching off internal buzzer 46
10.4 Switching external signaling devices on and off 47
10.5 Resetting external signaling devices and transmission devices 47
10.6 Triggering fire verification 47
10.6.1 Alarm verification 47
10.6.2 Starting time to investigate 48
10.6.3 Triggering alarm manually 48
To Next Page
Loading...
Need help?
General
