EasyManua.ls Logo

Bosch FPA-1200-MPC-C - Page 69

Bosch FPA-1200-MPC-C
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Panel Controller Diagnostics | en 69
Bosch Sicherheitssysteme GmbH User Guide 2017.09 | 7.0 | F.01U.258.929
Licence: Shows if a valid license key is inserted for the VAS over IP (“VA” or “OPC/VA”). If
no valid license key is available, the remaining time until the disconnection of the
connection to the VAS over IP is displayed.
Trigger configuration:
Mismatch: A VAS Virtual Trigger programmed in the FPA-5000/FPA-1200 configuration
cannot be matched to an equivalent trigger on the VAS over IP side. Please check the
mapping of the virtual VAS triggers/virtual control inputs configured in the FSP-5000-RPS
programming software and the VAS over IP configuration.
Compatibility: Shows whether the version of the connected VAS over IP is released for
the connection to an FPA-5000/FPA-1200. If a warning is displayed please check the
version of the VAS over IP.
Connection fault counter: Shows the number of connection errors to the VAS over IP
until the last reboot of the panel.
Address of VAS over IP: IP address of the VAS over IP.
Port of VAS over IP: VAS over IP port number. The default value is 9401.
To check the availability of the VAS over IP in the network, choose Send ping command to
send a ping request to the VAS over IP IP address.

Table of Contents

Other manuals for Bosch FPA-1200-MPC-C

Related product manuals