82 en | Day and night mode Panel Controller
2017.09 | 7.0 | F.01U.258.929 User Guide Bosch Sicherheitssysteme GmbH
2. Enter the numbers you require.
Refer to Entering numbers and text, page 29 for information on how to enter numbers.
3. Select OK to confirm the entry or Cancel to cancel the operation.
The entries are confirmed.
To change the set back time in day mode to night mode:
1. On the status bar, select
2. or
In the start menu, select Switch to night mode.
3. Select Change time.
4. Enter the numbers you require.
Refer to Entering numbers and text, page 29 for information on how to enter numbers.
5. Select OK to confirm the entry or Cancel to cancel the operation.
To Next Page
Loading...
