Boss BR-1180 - Organizing the Songs Youve Recorded; Displaying Song-Related Information (Song Information); Copying a Song (Song Copy)

76
Organizing the songs you’ve recorded
Displaying song-related
information (Song Information)
The following information for the currently selected song can
be displayed.
• Song number
• Song name
• Song protect on/off
• Data Type
• Amount of disk used by the current song
* The song sizes are displayed in units of 1M = 1,048,576 bytes.
The size displayed is an approximation.
1. Press [UTILITY].
2. Use [CURSOR] to select the “SONG” icon, and press
[ENTER].
fig.R12-01
3. Use [CURSOR] to select the “INFORMATION” icon,
and press [ENTER].
fig.R12-02
The song information screen appears.
fig.R12-03
Song#:
This shows the song number and song name.
If Song Protect is on, the Song Protect symbol will also be
displayed.
Data Type:
The data type is displayed.
Size:
The amount of disk (in megabytes) used by the current
song is displayed.
4. Press [EXIT] several times to return to the top screen.
Copying a Song (Song Copy)
This takes a song saved on the hard disk and copies it as a
separate song.
1. Press [UTILITY].
2. Use [CURSOR] to select the “SONG” icon, and press
[ENTER].
fig.R12-01
3. Use [CURSOR] to select the “COPY” icon, and press
[ENTER].
fig.R12-04
A list of songs saved on the hard disk is displayed.
fig.R12-05
4. Use [CURSOR] to select the copy source, then press
[ENTER].
Songs that are currently being used have a “*” before
their listing.
“Sure ?” appears in the display. Press [ENTER] again,
and the copy starts.
■ If you have changed the recording, editing, or
mixing settings, or effect song patches (p. 51)
The display will ask “Save Current?”
If you wish to save the current song, the state of the
mixer, and any changes in the song patch before you
execute the Song Copy operation, press [YES]. If you
wish to execute the Song Copy operation without
saving, press [NO].