Why is my Brady Label Maker printing compressed with poor registration?
If your Brady Label Maker is producing compressed print with poor registration, the platen roller might be dirty. Ensure that the last cut label has been removed from the label tray, and then clean the platen roller.
Why is my Brady BMP 21-PLUS Label Maker cutter not working?
If the cutter on your Brady Label Maker isn't cutting, there might be label slivers in the cutter assembly. Use a small tool like tweezers or needle-nose pliers to carefully remove the media slivers from the cutter assembly. Be careful not to damage any components and never use your fingers. If concerned, contact technical support.
Why is the cutter on my Brady BMP 21-PLUS not cutting?
If the cutter on your Brady Label Maker is not cutting, there might be label slivers in the cutter assembly. Use a small tool, such as tweezers or needle-nose pliers, to carefully remove the media slivers from the cutter assembly. Use caution not to damage any components, and avoid using your fingers due to sharp components. If you have concerns, contact technical support.
Why does my Brady Label Maker print a black line on the first label?
A black line on the first label from your Brady Label Maker is caused by leaving the cartridge in the locked position when not in use. This presses the print head against the platen roller, creating a pressure point line. To prevent this, unlock the cartridge after printing to avoid the warm print head burning ink onto the next label.
How to fix a Brady Label Maker keyboard that works intermittently?
To address the issue of the keyboard working intermittently or not at all on your Brady Label Maker, identify any keys that are stuck in the depressed position and repress the key to un-stick it.
What to do if my Brady Label Maker has poor print quality and I suspect the media?
If you are experiencing poor print quality on your Brady Label Maker, the media might not be usable. Try another media cartridge.
Why does my Brady BMP 21-PLUS show 'Error - Cannot Fit' when there are too many lines?
If you receive an "Error - Cannot Fit" message on your Brady Label Maker, it could be due to too many lines of text. The maximum number of lines allowed is four. Remember that a blank line is considered another line of text, so avoid pressing ENTER at the end of a line if you don't want another line.
How to fix a frozen screen on my Brady Label Maker?
If your Brady Label Maker screen freezes, it might be due to a user interface error. To resolve this: 1. Press the Power button to turn the printer off. If the Power button doesn't work: 2. Remove the AC adapter (if one is being used). 3. Remove the battery pack or batteries, then immediately re-insert them. 4. Power on the printer.
What to do if my Brady BMP 21-PLUS Label Maker printer is jammed and cannot feed labels?
If your Brady Label Maker is jammed and cannot feed labels, it's possible that the label exit chute is blocked, causing the label material to back up inside the printer. To clear the jam: Slide the locking lever to the unlock position to retract the platen, allowing cartridge removal. Remove the cartridge. Use tweezers or needle-nose pliers to carefully clear the label jam. Be cautious to avoid damaging the print head, as it is susceptible to scratches, dents, or cracks.
Why does my Brady BMP 21-PLUS Label Maker printer not power up when turned on?
If your Brady Label Maker printer is not powering up, the battery pack might not be charged. If using batteries, replace them with 6 new AA batteries. If you're using the lithium-ion battery, remove it from the printer and recharge it using the AC adapter. To use the printer while charging the lithium-ion battery, insert 6 AA alkaline batteries in the battery compartment.
Explanation of how to power the printer using AA batteries, a lithium-ion pack, or an AC adapter.
Instructions on how to turn the printer on and use the editing screen and status information.
Steps for printing a single label or multiple copies using the print and multi-print functions.
Applying symbols, international characters, barcodes, and serialization to labels.
Diagnosing and resolving issues related to hardware, power, print quality, and software errors.
Instructions for cleaning the printer's display screen and internal components for optimal performance.
General| Print Technology | Thermal Transfer |
|---|---|
| Resolution | 203 dpi |
| Keyboard Type | QWERTY |
| Display | LCD |
| Cutter Type | Manual |
| Max Print Width | 0.75 inches |
| Power Source | 6 AA Batteries or AC Power Adapter |
To Next Page
