Connecting to a PC 12-7
Printing from a PC
Before you can use your label printing system as a peripheral printer,
you must perform these tasks:
1. Set up your label printing system as a hardware device. Follow the
instructions in Setting Up Your System as a Hardware
Device on page 12-3.
2. Install the MarkWare
©
application. Follow the installation
instructions found in the MarkWare User’s Guide.
3. Install the appropriate printer driver for your printer. Follow the
instructions included with the driver.
Hint! Connect your label printing system to the PC and place it online
before running the MarkWare and driver installation on the PC.
The print driver install function includes a utility that will help
you if you are using a serial port for your printer.
To Next Page
Loading...
