Connecting to a PC 12-15
Upgrading the Operating System
Note: The Upgrade Printer Files button will be available but not
functional until there is a new product release. You will see the
message No updates at this time.
When new operating systems for your label printing system are
available, if you have access to a PC, it’s simple to upgrade.
Note: If you do not have access to a PC, instructions for upgrading will
be shipped to you with your upgrade card.
To upgrade using the File Management Utility (online)
1. Place your system online for transferring files. See Placing Your
System Online on page 12-4 for instructions.
2. After establishing a guest connection between your label printing
system and the PC, start the File Management Utility program on
the PC.
3. Select Upgrade Printer files.
4. Establish an Internet connection.
5. Select Upgrade from Internet.
6. After the upgrade is done, you will need to restart your label
printing system.
To upgrade using a CD-ROM
1. Place your system online for transferring files. See Placing Your
System Online on page 12-4 for instructions.
2. After establishing a guest connection between your label printing
system and the PC, start the Upgrade Utility program on the PC.
3. After the upgrade is done, you will need to restart your label
printing system.
To Next Page
Loading...
