Brigade Backeye 360 Select - Configuring the Trigger Off Delay

35
To exit the menu and save the changes, press the MENU button on
the remote control once to return to the menu home screen and then
again to exit.
Note: there is a short delay when exiting the menu as the system
saves the changes that have been made. Wait approx. 10 seconds
for the system to exit the menu.
Restart the system to “activate” the changes (turn vehicle ignition on/off).
Configuring the Trigger Off Delay
To change the trigger off delay time (the time to display the triggered view after the trigger is no longer
active), enter the OSD SETUP menu by pressing the MENU button and pressing OK on the SETUP
icon.
Use the TAB buttons to select the delay time for the desired view.
The OSD will first scroll down through the triggered view list and
then the trigger delay options, e.g. to select the Rear Trigger delay,
press the TAB down button 7 times. Highlighted arrows
indicate the current selection.
With the desired trigger delay option selected, use the arrow buttons
to change the delay time. Choose from 0-10 seconds.