Brocade Communications Systems FastIron - Page 277

clear sysmon counters pp error { all | decimal }
clear sysmon counters xbar { error | link } { all | decimal }
clear sysmon counters { ecc-error | link-error }
Parameters
all
Clears all sysmon counters.
fa
Clears the fabric adaptor sysmon counters.
error
Clears the fabric adaptor error counters. You can specify all or a fabric adaptor,
identified by the index.
link
Clears the fabric adaptor sysmon counters for links. You can specify all or a fabric
adaptor identified by the index.
pp error
Clears packet processor sysmon counters. You can specify all or a packet processor
identified by the index.
xbar
Clears cross bar sysmon counters for cross bar. You can specify all or a cross bar identified
by the index.
error
Clears the cross bar sysmon error counters. You can specify all or a cross bar
identified by the index.
link
Clears the cross bar sysmon counters for links. You can specify all or a cross bar
identified by the index.
ecc-error
Clears the ECC error count on FCX and ICX devices. This option is not supported on FSX
devices.
stack-unit
Specifies the stack unit on which errors to be cleared.
all
Specifies that all stack units are cleared of errors.
link-error
Clears the link error count on FCX and ICX devices. This option is not supported on FSX
devices.
stack-unit
Specifies the stack unit on which errors to be cleared.
all
System Monitoring
FastIron Ethernet Switch Administration Guide 277
53-1003625-01