The num is the number of prefixes that matches the percentage you
specified. For example, if you specified a threshold of 100 prefixes and 75
percent as the warning threshold, this message is generated if the Layer 3
switch receives a 76th prefix from the neighbor.
Message
Level
Warning
Message
rip filter list list-num direction V1 | V2 denied
ip-addr , num packets
Explanation Indicates that a RIP route filter denied (dropped) packets.
The list-num is the ID of the filter list.
The direction indicates whether the filter was applied to incoming packets or
outgoing packets. The value can be one of the following:
• in
• out
The V1 or V2 value specifies the RIP version (RIPv1 or RIPv2).
The ip-addr indicates the network number in the denied updates.
The num indicates how many packets matching the values above were
dropped during the five-minute interval represented by the log entry.
Message
Level
Warning
Message
Temperature is over warning level.
Explanation The chassis temperature has risen above the warning level.
Message Level Warning
Syslog messages
338 FastIron Ethernet Switch Administration Guide
53-1003625-01
To Next Page
Loading...
Need help?
General
