EasyManua.ls Logo

Brocade Communications Systems FastIron - Page 363

Brocade Communications Systems FastIron
388 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
In the absence of valid PSU power, the total PD power switched is equal to that available to PSE, as
shown in the following example.
device# show inline power pd
Number of PD Ports: 2
Total PD Power Available to PSE: 22400
Total PD Power Switched to PSE: 22400
Port Oper Oper Fault/
State Mode Error
--------------------------------
1/2/1 On 802.3at n/a
1/2/2 On 802.3at n/a
The following shows an example of the show inline power pd display output on a PoE device with the
internal PSU up and no PD ports on.
device# show inline power pd
Number of PD Ports: 2
Total PD Power Available to PSE: 0
Total PD Power Switched to PSE: 0
Port Oper Oper Fault/
State Mode Error
--------------------------------
1/2/1 Off n/a n/a
1/2/2 Off n/a n/a
The following shows an example of the show inline power pd display output on a PoE device with the
internal PSU up and one PD port on in the AT mode.
device# show inline power pd
Number of PD Ports: 2
Total PD Power Available to PSE: 0
Total PD Power Switched to PSE: 0
Port Oper Oper Fault/
State Mode Error
--------------------------------
1/2/1 On 802.3at n/a
1/2/2 Off n/a n/a
The following shows an example of the show inline power pd display output on a PoE device with the
internal PSU down and two PD ports on in the AT mode.
device# show inline power pd
Number of PD Ports: 2
Total PD Power Available to PSE: 22400
Total PD Power Switched to PSE: 22400
Port Oper Oper Fault/
State Mode Error
--------------------------------
1/2/1 On 802.3at n/a
1/2/2 On 802.3at n/a
The following example of the show inline power pd command output is displayed for devices such as
the ICX 6430-C12 that do not support PD ports.
device# show inline power pd
The cli is not applied to this platform
Syntax: show inline power pd
Field definitions for the show inline power pd command TABLE 44
Column Definition
Number of PD Ports The number of PD ports in the system.
Total PD Power
Available to PSE
Total PD power available to PSE.
Power over Ethernet
FastIron Ethernet Switch Administration Guide 363
53-1003625-01

Table of Contents

Related product manuals