Brocade Communications Systems MLX Series - Storage Environment; Safety Agency Approvals; Electromagnetic Approvals; Hardware Specifications for Netiron XMR Routers

296 Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
Hardware specifications for NetIron XMR routers
8
Storage environment
Table 48 provides the storage environment specifications for the Brocade MLX routers.
Safety agency approvals
• CAN/CSA-C22.2 No. 60950-1-07/UL60950-1 – Second Edition, Safety of Information
Technology Equipment
• EN 60825-1 Safety of Laser Products – Part 1: Equipment Classification, Requirements and
User’s Guide
• EN 60825-2 Safety of Laser Products – Part 2: Safety of Optical Fibre Communications
Systems
• EN 60950-1:2006\IEC 60950-1:2005, Second Edition, Safety of Information Technology
Equipment
Electromagnetic approvals
• FCC Part 15, Subpart B (Class A)
• EN 55022 (CE mark) (Class A)
• EN 55024 (CE mark) (Immunity) for Information Technology Equipment
• ICES-003 (Canada) (Class A)
• AS/NZ 55022 (Australia) (Class A)
• VCCI (Japan) (Class A)
• EN 61000-3-2
• EN 61000-3-3
• EN 61000-6-1
Hardware specifications for NetIron XMR routers
The following sections describe hardware specifications for NetIron XMR routers.
Power specifications
The following power supply frequency requirements apply to NetIron XMR 4000, 8000, and 16000
routers:
• AC Input Rating: 100 to 240V, 50/60 Hz, 16.0 A maximum per power supply
TABLE 47 Brocade MLX router operating environment
Operating temperature Relative humidity Operating altitude
(0° – 40°C) 32° – 104°F 5 to 90%, at (40°C) 104°F, non-condensing (0 – 2012 meters) 0 – 6600 ft
TABLE 48 Brocade MLX router storage environment
Storage temperature Storage humidity Storage altitude
(-25°– 70°C) -13° – 158° F 95% maximum relative humidity,
non-condensing
(0 – 4500 meters) 0 – 15,000 ft