42 Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
Installation precautions
2
Do not install the device in an environment where the operating ambient temperature might
exceed 40ºC (104ºF).
Make sure the airflow around the front, sides, and back of the device is not restricted.
If you do not install a module in a slot, you must keep the slot blank in place. If you run the device
with an uncovered slot, the system may overheat.
Never leave tools inside the device.
In order to protect the device from damage, utilize the original packaging when shipping the
device.
To Next Page
Loading...
Need help?
General
