Brocade Communications Systems NetIron MLXe Series User Manual

Follow these steps to remove a slot blank.
1. Loosen the screws on either end of the slot blank by hand or with a at-blade screwdriver.
2. Pull the slot blank out of the router, and store it in a safe place for future use.
NOTE
If you are hot-swapping a module, allow a minimum of two seconds after a module (or power supply or fan tray) has
been removed before inserting a module in the same slot.
Follow this procedure to install a module in the router.
Installing power supplies in the Brocade MLXe Series-8 router
Follow these steps to install a power supply in the Brocade MLXe Series-8 router.
1. Remove the power supply slot blank.
2. Remove the power supply from the packaging.
Installing a Brocade MLXe Series-8 router
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04 107

Brocade Communications Systems NetIron MLXe Series Specifications

General

Brand	Brocade Communications Systems
Model	NetIron MLXe Series
Category	Network Router
Language	English