Brocade Communications Systems NetIron MLXe Series User Manual

12. Once the chassis is securely inserted in the rack, fasten the mounting brackets to the front rails of the rack using 10-32 screws
(eight screws per side) and either clip nuts or oating nuts, whichever is appropriate for your rack type (see the following gure).
FIGURE 73 Securing the chassis in rack
Your rack installation is complete.
Installing modules in the Brocade MLXe Series-32 router
The Brocade MLXe Series-32 router ships with empty module slots and upper and lower shipping panels installed.
For instructions about installing 2x100GbE interface modules, refer to Installing 2x100GbE CFP2 interface modules in Brocade MLXe
Series routers on page 90.
Installing a Brocade MLXe Series-32 router
Brocade NetIron MLXe Series Hardware Installation Guide
152 53-1004203-04

Brocade Communications Systems NetIron MLXe Series Specifications

General

Brand	Brocade Communications Systems
Model	NetIron MLXe Series
Category	Network Router
Language	English