Brocade Communications Systems NetIron MLXe Series User Manual

Displaying power supply monitoring timestamps
To display timestamps for failures on any power supply, enter the following command.
device#show power-supply-monitoring
PS-1 PS-2 PS-3 PS-4
1 ) 0 0 0 0
2 ) 0 0 0 0
3 ) 0 0 0 0
4 ) 0 0 0 0
5 ) 0 0 0 0
6 ) 0 0 0 0
7 ) 0 0 0 0
8 ) 0 0 0 0
9 ) 0 0 0 0
10) 0 0 0 0
11) 0 0 0 0
12) 0 0 0 0
13) 0 0 0 0
14) 0 0 0 0
15) 0 0 0 0
16) 0 0 0 0
17) 0 0 0 0
18) 0 0 0 0
19) 0 0 0 0
20) 0 0 0 0
21) 0 0 0 0
22) 0 0 0 0
23) 0 0 0 0
24) 0 0 0 0
25) 0 0 0 0
26) 0 0 0 0
27) 0 0 0 0
28) 0 0 0 0
29) 0 0 0 0
30) 0 0 0 0
31) 0 0 0 0
32) 0 0 0 0
Monitoring Threshold: 32 flaps/hour
In the example above, the
congured power supply monitoring threshold is 32 cycles per hour.
You can also use the show running-cong command to display the power supply monitoring threshold conguration, as displayed in the
following example.
device#show running-config
Current configuration:
!
ver V5.4.0T163
module 1 br-mlx-2-port-100g-x
module 3 ni-mlx-48-port-1g-mrj21
!
!
!
no logging enable ntp
logging console
telnet login-retries 5
telnet server
power-supply monitoring threshold 32
username script password 8 $1$hR/..5B1$adiszoS76gLD9zIyFF1ER1
In the example above, the
congured power supply monitoring threshold is 32 cycles per hour.
Use the following command to show the uptime of modules:
device#show version | include time
Active Management uptime is 9 minutes 30 seconds
Standby Management uptime is 8 minutes 45 seconds
LP Slot 3 uptime is 8 minutes 48 seconds
Replacing a power supply
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04 251

Brocade Communications Systems NetIron MLXe Series Specifications

General

Brand	Brocade Communications Systems
Model	NetIron MLXe Series
Category	Network Router
Language	English