Brocade Communications Systems NetIron MLXe Series User Manual

TABLE 35 Router LED states and actions (continued)
LED label Desired state Meaning Abnormal state Meaning or action
enter the show
chassis
command at any
CLI prompt to
determine if a
power supply has
failed. If a power
supply has failed,
you must replace
it.
• If the LED is
amber, you must
replace the fan
module.
NOTE
If a problem persists after taking the actions described in this table, contact technical support.
Displaying the module status
After you have attached a PC or terminal to the console port or Ethernet port on the management module and the router has initialized
successfully, press Enter to display the CLI prompt in the terminal emulation window. This example is a prompt for a 16-slot router.
device>
If you do not see this prompt, check the following items.
1. Make sure the cable is securely connected to your PC or terminal and the console port or Ethernet port.
Verifying proper operation
Brocade NetIron MLXe Series Hardware Installation Guide
178 53-1004203-04

Brocade Communications Systems NetIron MLXe Series Specifications

General

Brand	Brocade Communications Systems
Model	NetIron MLXe Series
Category	Network Router
Language	English