Brooks firetracker FT1020G3 FDCIE - SSD Information (H5;A9)

Operation Manual
FT1020G3 Rev 2.4
127
25.9 SSD Information (H5/A9)
SSD name: as written in the EBLWin dialog box "System Properties" (Name).
Downloaded: date and time when the SSD was downloaded.
User: user name for the person who performed the SSD download.
Computer: computer name (if programmed) for the PC that was used for the SSD
download.
Domain: domain (if programmed) for the PC that was used for the SSD download.
EBLWin key: the unique number for EBLWin key.
Convention: (i.e. country specific functions, default EBLWin settings, etc.) is set in
conjunction with the installation of EBLWin.
Action
Text in display
Comments
"Menu"
According to chapter
"Access", see page 33.
Scroll to menu H5.
H5 Service
"
↲
"
A1 Calibration of supervised output
A2 Sensitive fault detection mode
A3 Service mode for COM-loop
A4 Display current consumption in Control Unit
A5 Display current consumption on COM-loop
A6 Display statistics for communication
A7 Activate address setting mode for DU
A8 Setup wireless detectors
A9 SSD information
Scroll to menu A8
A9 SSD information
"
↲
"
SSD name: Xxxxxxxxxxxxxxx
Downloaded: yyyy-mm-dd hh:mm
User: Nnnnnnn
Computer: Cccccccccccccc
Domain: Dddddddddddd
EBLWin key: 1234567890
Convention: XXX
If printer is mounted the
soft key "Print" will be
visible. Press "
Print" to
print the SSD
information.
Print
"
↲
" or "ESC"
A9 SSD information
Scroll to another menu
or press "ESC".