Operation Manual
FT1020G3 Rev 2.4
97
Disable output --------------------------------------------------
-
Loop unit _ _ _ output _
Automatic re-enable: No
Re-enable list (1)
Loop unit 000001 output 0
Select in the Re-enable list
with "▼" (in this example
there is only one item) and
press "
".
Re-enabled output will
disappear from the list,
indicated with a beep.
of disablement
"
"
output
Loop unit 000000 output 0
another output or press
"
ESC".
of
B2 Output
B3 Output type
B4 Alarm devices
B5 Routing equipment
B6 Alert annunciation function
Scroll to another menu or
press "ESC" or "Escape
menu
".
menu
To Next Page
Loading...
