Brother MFC-8380DN - EEPROM of Main PCB Failure 3-13; EEPROM Writing Error; HVPS PCB During Standby Failure 3-13; Main PCB RAM Failure

3-13
Confidential
■ Error code 35
EEPROM of main PCB failure
■ Error code 36
HVPS PCB during standby failure
■ Error code 3B
Main PCB RAM failure
■ Error code 3C
EEPROM writing error (Not applicable)
Error code 3D
EEPROM reading error (Not applicable)
Error code 3E
EEPROM bus error (Not applicable)
Print Unable 35
Turn the power off and then back on again.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Print Unable 36
Turn the power off and then back on again.
Step Cause Remedy
1 HVPS PCB unit failure Replace the HVPS PCB unit.
2 Main PCB failure Replace the main PCB ASSY.
Print Unable 3B
Turn the power off and then back on again.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Print Unable 3C
Turn the power off and then back on again.
Print Unable 3D
Turn the power off and then back on again.
Print Unable 3E
Turn the power off and then back on again.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.