Brother MFC-8380DN - USB Host PCB ASSY

5-178
Confidential
9.18.5 USB Host PCB ASSY
(1) Remove the two cup B M3x10 Taptite screws, and remove the USB PCB holder from the
Joint cover FL.
Fig. 5-208
(2) Disconnect the Connector of the USB host harness from the USB HOST PCB ASSY.
(3) Remove the cup S M3x6 SR Taptite screw, and remove the USB HOST PCB ASSY from
the USB PCB holder.
Fig. 5-209
Taptite cup B M3x10
USB PCB holder
Joint cover FL
2
3
Taptite cup S M3x6 SR
USB HOST harness ASSY
USB HOST PCB ASSY
USB PCB holder