EasyManua.ls Logo

BT REFLEX RR B7-8C - Page 242

BT REFLEX RR B7-8C
514 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
24- 30 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Electronic card – 5710
Warning Codes without registration
2. If LD203 does not go out, check the cable by also removing it
from terminal 203.
3. If LD203 does not go out, replace the A5 electronic card.
Safety switch (left-foot switch), S23
1. If LD110 is on the entire time.
- Check that the safety switch has not been strapped.
- Remove cable 43 on the switch S23, terminal 3. If LD110 goes
out, check the functionality of S23.
2. If LD110 does not go out, check the cable by also removing it
from terminal 110.
3. If LD110 does not go out, replace the A5 electronic card.
Code 15
Description Safety switch activated more than 20 minutes with-
out moving the truck
Error mode No corrective action
Error cause 1. Strapped switch
2. Faulty switch/wiring
3. Defective electronic card A5
Comments
https://www.forkliftpdfmanuals.com/

Table of Contents

Related product manuals