Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 24- 91
Electronic card – 5710
Error Codes
1. Check that the battery is okay, sufficiently charged and of the
right model.
2. Check that the drive motor is okay.
3. If everything else is okay, replace A1.
Code 209 - 210
Description Too high voltage on drive regulator
Error mode Drive regulator error
Error cause 1. Defective battery
2. Defective motor
3. Defective drive regulator, A1
Comments
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...