T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
24- 90 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Electronic card – 5710
Error Codes
1. Check the fan M12, by the frequency converters.
2. Check the drive motor and its cables.
3. If everything else is okay, replace A1.
Drive motor circuit
1. Check that the motor cables are intact and connected correct-
ly.
2. Replace the drive regulator, A1.
Code 206 - 207
Description Overheated drive regulator
Error mode Drive regulator error
Error cause 1. Defective cooling fan
2. Defective motor, M1
3. Defective drive regulator, A1
Comments Restart possible
Code 208
Description Too high current on drive regulator
Error mode Drive regulator error
Error cause 1. Motor cables incorrectly connected
2. Defective driving regulator, A1
Comments
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...