T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
24- 98 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Electronic card – 5710
Error Codes
CAN – communication between A5 and A2
1. Check that the cables 117, 118, 119 and 120 are not short-
circuited or are broken. Also check the resistor R101.
2. Try using a new lift regulator A2.
Code 233 - 234
Description CAN fault on the lift regulator
Error mode Lift regulator error
Error cause 1. Faulty CAN wiring/resistance
2. Defective lift regulator
Comments
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...