btsr SMART KTF 2000 - Page 142

Appendix B – Quick Reference SMART KTF 2000 – KTF/RW
B.10 - SMART KTF 2000
Symbols Key
TENS – Reading the Programmed/Measured yarn Tension value on KTF/RW
Select the desired KTF (NN)
PPP = Programmed Tension (MAIN TENSION parameter)
MMM = Measured Tension on device NN
SPEED – Reading the yarn feeding Speed (in m/min) of a KTF/RW Device
Select the desired KTF (NN)
VVV = Speed of Device NN in Mt/min
Device NN not connected or motor steady
METER
–
Measuring the amount of yarn fed by KTF/RW Devices
Select the desired KTF
(NN)
MMM = Meters of yarn fed by
device NN
Total counter clear on all
KTF devices
Total counter clear on device NN