137
Spare parts and accessories
Spare part for the 8035 Batch and the SE35 Batch Order code
6
8
4
7
1
2
9
Electronic board mounted in the cover with lid, with
window, foil and four screws (position 1)
425 432
Power supply board 115/230 VAC (position 2) +
mounting instruction sheet
553 168
Set including:
• two M20x1,5 cable glands (position 3)
• two neoprene flat seals (position 5) for cable gland or
screw plug
• two M20x1.5 screw plugs (position 6)
• two 2x6 mm multiway seals (position 8)
449 755
Set including:
• two M20x1,5 / NPT1/2'' reductions (mounted o-ring
seal) (position 4)
• two neoprene flat seals for plug (position 5)
• two M20x1.5 screw plugs (position 6)
551 782
Set including:
• one M20x1,5 cable gland stopper gasket (position 7)
• one multiway seal, 2x6 mm, for cable gland (position 8)
• one black EPDM seal (unused)
• one mounting instruction sheet
551 775
Housing (position 9) with Hall effect flow sensor
425 248
Set with 8 FLOW foils
553 191
English
Type 8025 - 8035 - SE35 BATCH
To Next Page
Loading...
