EasyManua.ls Logo

Burkert ME43 - Page 61

Burkert ME43
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
61
Troubleshooting
Type ME43
Errorcode Description
33/13 Output value simulation for at least one value active.
33/14 Demo mode activated.
33/32768 1 Status message is pending.
35/1 EERPROM error has been detected.
35/2 At least 1 persistent memory cannot be used.
40/996 Error on 1 or more partner device(s).
45/256 büS event: büS is NOT operational.
45/257 büS event: initialize communication.
45/512 büS event: localization.
45/768 büS event: a device uses the same NodeID.
45/1024 büS event: bus connection lost / not available.
45/1792 büS event: partner allocation active.
45/1793 büS event: producer(s) not found.
45/1794 büS event: manual set device without NodeID. Search can take up to 1 minute.
45/1795 büS event: allocation of producer failed.
45/1796 büS event: deallocation of producer failed.
45/1797 büS event: invalid mapping for CANopen device.
45/1798 büS event: GCV value is mapped on both büS interfaces.
45/1799 büS event: cyclic communication of producer not active.
45/2048
büSevent:savepersistentbüSdata(don‘tturnothedevice).
45/2049 büSevent:deletepersistentbüSdata(don‘tturnothedevice).
45/2304 büS event: router for acyclic data active.
45/2560 büS event: invalid serial number.
45/2561
büSevent:invalidreceivevalueconguration(notenoughlter).
45/2562 büSevent:invalidcongurationofcyclicvalues.
45/2816 büS event: manager active.
45/3072 büS event: observed device failed.
45/3584 Waiting for addressing.
45/4096 Error during device parameter initialization.
45/4097
Conguredaddressalreadyinuse.
51/1 No proper connection to the process control system.
51/2
Cyclicdatatransferhasbeenslowerthanconguredtimeout.
51/10 Initialization of industrial communication.
51/101
ErrorwhileNetXconguratione.g.downloadingrmwaretoNetX.
51/102 IndustrialcommunicationispoweredO.
51/103 Noorincorrectmappingleavailable.
51/104 Noprotocolrmwareavailable.
51/105 Please select a protocol and restart the device.
51/201 Protocol stack initialization error.
51/202
Protocolstackcongurationerror.
51/203 Error while sending MAC-address.
51/204 Error while register objects.
english

Table of Contents