Burkert ME43 - Device Maintenance; Maintenance Safety Precautions; Fieldbus Gateway Replacement

57
Maintenance
Type ME43
13 MAINTENANCE
13.1 Safety instructions for maintenance
WARNING!
Riskofinjuryfromimpropermaintenancework.
▶ Maintenance may be carried out only by trained technicians and with the appropriate tools.
▶ Secure system against unintentional activation.
▶ Following maintenance, ensure a controlled restart.
13.2 Replacement of the eldbus gateway ME43
Procedure:
1.Switchosupplyvoltage.
2.Remove5-pinspring-typeterminal.
Figure 30: Remove 5-pin spring-type terminal
3.RemoveEthernetcablefromtheX2andX2interfaces.
ForthePROFIBUSversionandCC-Linkversion:Removeplug-inconnectorD-Sub,9-pin.
4.Removethedevicefromthestandardrail.
Figure 31: Remove the device from the standard rail
→ Push the device upwards and detach it from the upper guide of the standard rail.
english