Burkert ME43 - Device Disassembly

65
Disassembly
Type ME43
16 DISASSEMBLY
WARNING!
Riskofinjuryfromimproperdisassembly.
▶ Disassembly may be carried out by authorized technicians only.
1.Switchosupplyvoltage
2.Remove5-pinspring-typeterminal.
Figure 34: Remove 5-pin spring-type terminal
3.RemoveEthernetcablefromtheX2andX2interfaces.
ForthePROFIBUSversionandCC-Linkversion:Removeplug-inconnectorD-Sub,9-pin.
4.Removethedevicefromthestandardrail
Figure 35: Remove the device from the standard rail
→ Push the device upwards and detach it from the upper guide of the standard rail
english