Burkert ME43 - Packaging and Transport Guidelines; Storage Recommendations; Device Disposal Procedures

To Next Page

To Previous Page

Type ME43

Packaging, transport

17 PACKAGING, TRANSPORT

NOTE!

Damageintransitduetoinadequatelyprotecteddevices.

• Protect the device against moisture and dirt in shock-resistant packaging during transportation.

• Observe permitted storage temperature.

18 STORAGE

NOTE!

Incorrectstoragemaydamagethedevice.

• Store the device in a dry and dust-free location.

• Storagetemperature:-30°Cto+80°C.

19 DISPOSAL

NOTE!

Damagetotheenvironmentcausedbydevicecomponentscontaminatedwithmedia.

• Dispose of the device and packaging in an environmentally friendly manner.

• Observe applicable disposal and environmental regulations.

Observe national regulations on the disposal of waste.

english

Main Page

Default Chapter3
- Table of Contents3
1 The Operating Instructions6
- Symbols6
- Begriffsdefinitionen7
2 Intended Use7
3 Basic Safety Instructions8
4 General Information9
- Contact Address9
- Warranty9
- Information on the Internet9
5 Product Description10
6 Technical Data11
- Conformity11
- Standards11
- Operating Conditions11
- Mechanical Data11
- Electrical Data11
- Type Label, Device Labeling12
- Industrial Ethernet12
- PROFIBUS DPV1 Specifications13
- CC-Link Specifications14
7 Installation15
- Safety Instructions15
- Mounting on Standard Rail15
- Electrical Connection16
- Establishing Connection to Fieldbus16
8 Start-Up18
- Safety Instructions18
- Base Settings18
- Selecting Fieldbus Protocol18
- Configuration of the Fieldbus Gateway19
- Protocol Settings for Connecting the Device to the PLC Network32
9 Operation35
- Safety Instructions for Operation35
- Operating Elements of Type ME4335
- Operation of Type ME43 Using the Display35
  - Description of the Keys36
- Operation of Type ME43 Using the "Bürkert Communicator" Software37
  - Bürkert Communicator User Interface37
  - Establishing a Connection between the Device and Bürkert Communicator38
- Importing and Saving Data Using the Micro SD Card39
- Display Elements of the Type ME4341
- Leds for Indicating the Network Connection to the Industrial Ethernet41
- LED for Indicating Device Status42
10 Setting up the Büs Network43
- Conversion Industrial Ethernet To Büs43
- Theoretical Principles For The Selection Of Büs Devices And Process Values43
- Configuration Of The Büs Network45
- Download Gateway Configuration File For Device Configuration46
11 Web Server47
- Connection to the Web Server47
- Access to the Web Server47
- Configuring Ethernet Device48
12 Other Setting Options50
- Settings On The Display Of The Fieldbus Gateway Me4350
- Settings Using The Pc Software "Bürkert Communicator51
  - F(X) Configuration51
  - Overview of Device-Specific Setting Options that Can be Adjusted Using Bürkert Communicator51
13 Maintenance57
- Safety Instructions For Maintenance57
- Replacement Of The Fieldbus Gateway Me4357
14 Troubleshooting59
- Description Of The Error Codes60
- Status Indicators And Action To Be Taken63
15 Accessories64
16 Disassembly65
17 Packaging, Transport66
18 Storage66
19 Disposal66

Burkert ME43 - Packaging and Transport Guidelines; Storage Recommendations; Device Disposal Procedures

Table of Contents