Burkert ME43 - Basic Safety Instructions

8
Basic safety instructions
Type ME43
3 BASIC SAFETY INSTRUCTIONS
These safety instructions do not consider any contingencies or incidents which occur during installation,
operationandmaintenance.Theoperatorisresponsibleforobservingthelocation-specicsafetyregulations,
also with reference to the personnel.
Generalhazardoussituations.
To prevent injury, ensure the following:
▶ Operate the device only in perfect condition and in accordance with the operating instructions.
▶ Do not make any changes to the device and do not subject it to mechanical stress.
▶ Secure device or system to prevent unintentional activation.
▶ Only trained technicians may perform installation and maintenance work.
▶ Install the device according to the regulations applicable in the country.
▶ After an interruption in the power supply, ensure that the process is restarted in a controlled manner.
▶ Observe the general rules of technology.
NOTE!
Electrostaticsensitivecomponentsandmodules.
The device contains electronic components which react sensitively to electrostatic discharge (ESD).
Contactwithelectrostaticallychargedpersonsorobjectsarehazardoustothesecomponents.Inthe
worstcasescenario,thesecomponentswillbedestroyedimmediatelyorwillfailafterstartingup.
• To minimize or eliminate the risk of damage resulting from sudden electrostatic discharges, ensure com-
pliance with the requirements of EN 61340-5-1.
• Do not touch electronic components while the supply voltage is switched on!
english