Burkert ME43 - Micro SD Card Data Management

39
Operation
Type ME43
9.5 Importing and saving data using the Micro SD card
TheMicroSDcardcanbeusedtosaveandtransferdevice-specicvaluesandusersettingstoadierent
device.
The Micro SD card is not suitable for backups. If the Micro SD card of the device is re-inserted at a
later date, the most recently saved data is not restored. The function of the Micro SD card is limited
to exchanging data.
Note!
By resetting the device to the factory settings, the data saved on the SD card is also reset.
A Micro SD card which has just been inserted is checked for existing data during device restart. If applicable,
this data is accepted or overwritten:
• The Micro SD card does not contain any data.
Theexistingdevice-specicvaluesandusersettingsaresavedontheMicroSDcard.
• The Micro SD card contains data which is compatible with the device.
TheMicroSDcarddataisimportedbythedevice.Theexistingdevice-specicvaluesandusersettings
are overwritten.
• The Micro SD card contains data which is not compatible with the device.
ThedeviceoverwritesthedataontheMicroSDcardwithitsowndevice-specicvaluesanduser
settings.
NOTE!
DonotuseconventionalretailMicroSDcardsforthedevice.
TheinsertedMicroSDcardisaspecialindustrial-gradeversionwhichisparticularlydurableandtem-
perature-resistant.
PurchasetheMicroSDcardfortheeldbusgatewayME43viayourBürkertsalesbranchonly.
The Micro SD card is available as an accessory, see “15 Accessories”.
english