160 cab Produkttechnik GmbH & Co KG
160
PRODUCT MARKING AND BARCODE IDENTIFICATION
Hermes
Apollo
A-series
This
function is
available
for:
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX][ESC][i][L][S]
M-series
P - Set Peel-Off Mode
This command needs an optional peel off sensor, which varies from printer type to printer type.
This command pauses the printer after each label. The next label prints, when the actual label is
removed.
P[disp]
CR
P = Peel-Off Mode command.
disp = displacement in millimeters or inches (optional parameter)
positive and negative values can be used, depending in which
direction the displacement should work.
The "P" command needs to be placed after the definition of the page size ! ("S"- command)
Syntax:
To Next Page
Loading...
