CAB A Series - s: Set Date;Time

cab Produkttechnik GmbH & Co KG 63
63
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
Hermes
Apollo
A-series
This
function is
available
for:
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
M-series
s - set Date/Time
used to set date and time temporarily to be recalled on a label.
The printer´s internal clock chip and enables the user to recall time or date from the printer´s internal
clock. (A-Series and M-Series only - since firmware version 2.78 the time is also changed on the
printer´s internal real time clock)
This is useful when the printer is driven in "Stand Alone" mode, where no external data source is
available. (A-Series)
s n[ss] CR
s = Set date / time command.
n= ASCII - string in following format to adjust date and time in the printer of
following format: YYMMDDhhmmss
YY = Year - 2 digits
(values between 70 and 99 are interpreted as
1970-1999. Anything else is treated as year2000)
MM = Month. - 2 digits
DD = day - 2 digits
hh = hour - 2 digits
mm = minutes - 2 digits
[ss] = seconds - 2 digits
(setting of ss is optional)
s 031105091500
Sets printer date and time to:
November 24, 2003 9:15 a.m.
Syntax:
Example: