CAB A Series - [Mod10:X] Calculates the Modulo 10 Checkdigit

208 cab Produkttechnik GmbH & Co KG
208
PRODUCT MARKING AND BARCODE IDENTIFICATION
Hermes
Apollo
A-series
This
function is
available
for:
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX][ESC][i][L][S]
M-series
[MOD10:x] Calculates the Modulo 10 Checkdigit
Calculates and prints the Modulo 10 Checkdigitfor numerical barcodes
[MOD10:x]
x = value which is used to calculate the checkdigit
This function can be used to visualize checkdigits of barcodes, which are sometimes invisible. Some
barcodes use a checkdigit for the scanner only which is not displayed in the human readable line.
Some applications require this checkdigit for internal usage. This can be done with the "Mod10"
function.
J
S l1;0,0,68,71,100
T:input;10,10,0,3,5;123456789
B 10,20,0,2OF5+MOD10,10,.3;[input]
T 10,40,0,3,5;[input][MOD10:input]
A 1
This example uses the input variable for a interleaved 2 of 5 barcode, which has to contain a modulo
10 digit. Usually only the input data is copied to a second field. As the printer cannot know, that the -
normally invisible checkdigit shall be shown on the label. Therefor [MOD10:input] is used.
Syntax:
Example:
no
no