CAB A Series - [Ser

cab Produkttechnik GmbH & Co KG 225
225
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
Hermes
Apollo
A-series
This
function is
available
for:
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
M-series
[SER:...] - Serial numbering
Causes the printer to print serial numbers.
[SER:start{,incr,{freq}}]
start = Initialisation value
- sets the start number
incr = increment value
- presets the number which is added to the start number
freq = frequency - defines the number of identical values on the
labels before the serialnumber increments.
cab printers will use automatically "1" if incr and freq are not set.
J
S l1;0,0,68,71,100
T:CNT; 10,15,0,3,10;[SER:1][I]
T:FIELD1;10,10,0,3,10;[+:1,CNT][C:0][D:4,0]
T:FIELD2;10,20,0,3,10;[+:1,CNT][C: ][D:4,0]
A 5
The same example as for the "C:Fill.." command has been used
(leading zeroe replacement)
Please see there to get more information about these functions
Example:
Syntax: