CAB A Series - [Dbf; Database File Access

cab Produkttechnik GmbH & Co KG 217
217
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
Hermes
Apollo
A-series
This
function is
available
for:
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
M-series
[DBF:... ] Database file access
[DBF:key,keyvalue,entry]
Command to access data from a DBase IV
TM
compatible database on the optional memory card.
key = Search value of the database
keyvalue = is defined by the alphanumeric value in the actual record
entryfield = transmits the value of the actual record
[DBF:NUMBER,NUMBERTA,ARTICLE]
Searches in the database for the keyvalue NUMBER, in the table NUMBERTA and transmits the
value of ARTICLE.
The" E "command must be defined,before this command can be used.
Only one database can be used at the same time in a label.
This function makes only sense if small databases are used. More database possibilites are available
with the cab database connector (A-series printers only) , later described in this manual.
Syntax:
Example: